To
install the OnRequest™ project
onto your computer or network,
you must copy the project folder
onto a hard drive or appropriate
network drive.
Once
the project folder is copied,
the project’s files must
be converted from read-only files
to read-write files. To convert
the files, navigate to where the
folder now resides.
Open
the Master Project folder and
select all of the files it contains.
Right-click on one of the files.
Select “Properties”
from the menu that appears. Uncheck
the “read-only” box
and place a place in the box next
to “Archive.” Select
the “OK” button and
close the Master Project folder.
Proceed
with launching the OnRequest™
application and opening your Master
Project via the file pulldown
menu.
Directions
for the most current OnRequest™
Patch
- Save
the file "623232A.RTP"
(located on enclosed CD ROM)
to the directory that contains
the "Aperture.exe"
file (by default Aperture™
would have been installed to
your C: drive, unless you instructed
otherwise (you may have had
the installation made to your
Programs folder/directory).
- Open
windows explorer and go to the
Aperture™ directory.
- Double
click on the "patchgui.exe"
file.
- Click
on the 'File' pull down menu
and select 'apply'.
- Click
on the "Find" button,
and choose the patch that was
saved in the Aperture™
directory.
- Click
on "apply".
Additional
Support Information
If
you are having problems selecting
objects in your OnRequest™
drawings, you may need to adjust
the win.ini settings.
To modify these settings, open
the win.ini file via Wordpad.exe.
Then paste the following settings
at the bottom of the list. If
you have never made an adjustment
the win.ini file, please contact
your system administrator for
assistance.
[Aperture]
PaletteBackGround=0
PickByLayer=0
Maximized=1
HelpStrings=0
DrawingClipboard=1
ODBCCache=0
AcadinColorDefaultBlack=Yes
NoClearBrush=0
DoScaleBrush=1
RegionFixup=1
ColorMix=0
ReportTopMargin=.5
ReportBottomMargin=.5
ReportLeftMargin=1
ReportRightMargin=1
|
